Woodcutting Tungsten (Cemented) Carbide Strips with length 330mm
320mm, 310mm, mirror polishing
Tungsten(Cemented) carbide strip is available for different
grinding geometric parameters and suitable for both cutting
materials and nonmetal materials, also it can be applied to
conventional, carbide inserts, semi-automatic lathe, automatic
lathe and planning machine to work grooves and operate cutting etc,
as a widely know cutting tools.
Key Specifications/Special Features:
1. Description of tungsten carbide(cemented carbide) strips:
Tungsten carbide strips with the characters of high hardness, high
strength and toughness, good wear resistance, heat resistance,
corrosion resistance and a series of excellent performance,
especially high hardness and wear resistance of it, even at a
temperature of 500 degrees also remained same, at 1000 degrees
still keeps the high hardness.
2. Application:
Tungsten carbide nowadays is widely used in many areas such as :
cutting tools , mould , oil and automobile industry etc .
Tungsten carbide strips are used as the cutter for the TCT
woodworking knives for cutting all kinds of original wood , hard
wood , HDF, MDF , plywood , particle board , laminated board,
composite material ,grass, aluminum and metals . It can give much
more excellent performance than HSS. They also can be used for as
wear parts with its high hardness and long life time.
Grades properties recommended for strips
| GRADE | ISO CODE | USA CODE | BINDER | DENSITY | HARDNESS | TRANSVERSE RUPTURE STRENGTH | GRAIN SIZE | RECOMMENDEDCUTTING APPLICATIONS | REMARKS |
|---|
| XK10 | K10 | C2 | 6 | 14.8-15.0 | 90.5-91.5 | ≥2200 | Medium | for solidwood,hardwood
| HIP |
| XK20 | K20 | C1 | 8 | 14.6-14.8 | 89.5-90.5 | ≥2400 | Medium | for softwood,solidwood etc
| HIP |
| XF6 | K10 | C3 | 6 | 14.7-14.9 | 92.0-92.8 | ≥2200 | Fine | for solidwood, hardwood and composite board etc
| HIP |
| XF8 | K20 | C2 | 8 | 14.5-14.7 | 91.0-92.0 | ≥2300 | Fine | for construction formwork with nails, non-ferrous metal and various
woodworking tools etc | HIP |
| XF10 | K30 | C2 | 10 | 14.3-14.5 | 90.5-91.5 | ≥2400 | Fine | for solidwood,hardwood and various woodworking tools etc | HIP |
| SM10 | K30 | C6 | 10 | 14.2-14.4 | 92.0-92.5 | ≥3000 | Sub-micron | for hardwood, non-ferrous metal, PCB circuit board and various
woodworking tools etc | HIP |
At XINPIN workshop, all strips must be hot isostatic pressed up to
24hours to increase the transverse rupture strength by 30%,finally
can give the strips a longer and high quality service life.
HIP: Hot isostatic pressing can effectively eliminate the internal
porosity of the alloy and significantly improve the bending
strength of the products. and our testing effect show that our
strips after hot isostatic pressing, the using life can be longer
and there was a marked decrease in breaking.
The unique grinding and coating process allow us to create a
long-lasting cutting edge which practically rules out wear on the
rake face.
Drawing of our standard strips for your reference, and we can also
do the customized unique special mould according to cutsomer's
demands.
We at XINPIN assure that your orders will receive individual
attention, whether it is big or small, we welcome your testing.
